# Kurviger 1.13.16 (Beta)

**URL:** <https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855>\
**Category:** News and Updates about Kurviger\
**Created:** [March 26, 2020, 3:43pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855 "2020-03-26T15:43:10Z")\
**Posts on this page:** 20\
**Page:** 7

<div class="post-metadata">

**Author:** ![Michael\_Class](https://forum.kurviger.com/user_avatar/forum.kurviger.com/michael_class/32/1042_2.png) [@Michael\_Class](https://forum.kurviger.com/u/Michael_Class)\
**Post date:** [June 15, 2020, 9:02am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/122 "2020-06-15T09:02:40Z")

</div>

Hello,  
just came back from a 5 day tour with kurviger 1.13.9 running on an Huawei Mate 9 (Android 9). Routes were fine and most things worked extremely smooth.

One thing though: I made use of the new “Pause” function quite a lot. But unfortunately there seems - at least for me - an issue: What happened is that after the Pause, the fact that I have already passed some of the waypoint was “forgotten” I had manually delete passed waypoint to be “on track” again. This was all with switched off automatic re-routing.

It could be an artifact of the Huawei device. On the bike I have connected the phone to power (which makes is run quite reliable), But the power is switch with ignition. Meaning that when stopping, the Phone runs on battery. Due to the aggressive killing of apps that Huawei does (even though I switched off all of these “features” that I can) it could happen that kurviger would be restarted. Could that be the cause that the fact that I have already passed some wayspoint is forgotten? How is the state of the waypoints (passed/not-passed) persisted? Or is there a general bug which might have cause the issue?

Cheers,  
Michael

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 15, 2020, 9:06am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/123 "2020-06-15T09:06:20Z")

</div>

It would help if there was a route sample and details where that happened.

> [@Michael\_Class](#):
>
> What happened is that after the Pause, the fact that I have already passed some of the waypoint was “forgotten” I had manually delete passed waypoint to be “on track” again.

Was “Strict navigation” selected in “Settings | Navigation | Rerouting mode”?

> [@Michael\_Class](#):
>
> Due to the aggressive killing of apps that Huawei does (even though I switched off all of these “features” that I can) it could happen that kurviger would be restarted.

[Battery optimization](https://dontkillmyapp.com/) usually closes the apps, it does not restart them again.

---

<div class="post-metadata">

**Author:** ![Michael\_Class](https://forum.kurviger.com/user_avatar/forum.kurviger.com/michael_class/32/1042_2.png) [@Michael\_Class](https://forum.kurviger.com/u/Michael_Class)\
**Post date:** [June 15, 2020, 9:18am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/124 "2020-06-15T09:18:32Z")

</div>

“Was “Strict navigation” selected in “Settings | Navigation | Rerouting mode”?”

Yes!

“[Battery optimization](https://dontkillmyapp.com/) usually closes the apps, it does not restart them again.”

I might have switched to other apps in between (e.g. by taking a photo). So I am not really sure if I have restarted the app …

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 15, 2020, 9:24am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/125 "2020-06-15T09:24:05Z")

</div>

> [@Michael\_Class](#):
>
> “Was “Strict navigation” selected in “Settings | Navigation | Rerouting mode”?”
> 
> Yes!

With [strict navigation](https://forum.kurviger.com/t/app-strict-navigation/2284) cannot skip automatically waypoints (either paused or not).  
Need to pass all of them in order.

_It would help if there was a route sample and details where that happened._

---

<div class="post-metadata">

**Author:** ![Michael\_Class](https://forum.kurviger.com/user_avatar/forum.kurviger.com/michael_class/32/1042_2.png) [@Michael\_Class](https://forum.kurviger.com/u/Michael_Class)\
**Post date:** [June 15, 2020, 9:41am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/126 "2020-06-15T09:41:54Z")

</div>

" With [strict navigation](https://forum.kurviger.com/t/app-strict-navigation/2284) cannot skip automatically waypoints (either paused or not). Need to pass all of them in order."

Well, I have passed the waypoints already. Things were good up to the Pause. Only after the pause, the waypoints were coming back as not passed. I have some suspicion that the fact that I have passed the waypoint is not persisted and thus a potential restart gets me into the situation (which ofc ourse was solvable by manually deleting the passed waypoints).

" _It would help if there was a route sample and details where that happened._"

I do understand that, but that is not a simple thing. I do have the routes, but not the details on tha pause (e.g. when power was disconnected, did I take photos, was I suing the phone for other purpuse during the pause …)

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 15, 2020, 9:47am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/127 "2020-06-15T09:47:09Z")

</div>

Need to clarify what exactly did with the app, now it’s not very clear what happened.

> [@Michael\_Class](#):
>
> I have some suspicion that the fact that I have passed the waypoint is not persisted and thus a potential **restart** gets me into the situation (which ofc ourse was solvable by manually deleting the passed waypoints).

When app restarts, navigation obviously starts again.  
That’s the purpose of pause / continue function.

---

<div class="post-metadata">

**Author:** ![linux-user](https://forum.kurviger.com/user_avatar/forum.kurviger.com/linux-user/32/56_2.png) [@linux-user](https://forum.kurviger.com/u/linux-user)\
**Post date:** [June 15, 2020, 9:51am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/128 "2020-06-15T09:51:55Z")

</div>

> [@Michael\_Class](#):
>
> So I am not really sure if I have restarted the app …

Did you see the pause symbol before continuing your route?

 ![Screenshot_20200615-113127](https://forum.kurviger.com/uploads/default/original/2X/1/160956d237511b9eb99aa5bf7124e9666d48251d.jpeg)

---

<div class="post-metadata">

**Author:** ![Uli\_LH](https://forum.kurviger.com/user_avatar/forum.kurviger.com/uli_lh/32/562_2.png) [@Uli\_LH](https://forum.kurviger.com/u/Uli_LH)\
**Post date:** [June 15, 2020, 10:50am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/129 "2020-06-15T10:50:08Z")

</div>

> [@Sabu](#):
>
> I only can change the color but not the transparency…

“Transparancy” is the “Alpha (A)” channel (maybe that helps … 😉 ).

---

<div class="post-metadata">

**Author:** ![Michael\_Class](https://forum.kurviger.com/user_avatar/forum.kurviger.com/michael_class/32/1042_2.png) [@Michael\_Class](https://forum.kurviger.com/u/Michael_Class)\
**Post date:** [June 15, 2020, 11:00am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/130 "2020-06-15T11:00:12Z")

</div>

> [@linux-user](#):
>
> Did you see the pause symbol before continuing your route?

Yes, I have simply pressed “unpause” … not a complete new start of the route. But still the last one to three (depending) waypoints which I had already passed before the pause were in the route again and I had to manually skip them.

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 15, 2020, 11:10am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/131 "2020-06-15T11:10:50Z")

</div>

> [@Michael\_Class](#):
>
> But still the last one to three (depending) waypoints which I had already passed before the pause were in the route again and I had to manually skip them.

Where was the last waypoint, on the stop?  
Then you might not have actually passed it.

(anyway we just discuss possibilities, since it’s impossible to know what happened)

---

<div class="post-metadata">

**Author:** ![Sabu](https://forum.kurviger.com/letter_avatar_proxy/v4/letter/s/22d042/32.png) [@Sabu](https://forum.kurviger.com/u/Sabu)\
**Post date:** [June 15, 2020, 11:29am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/132 "2020-06-15T11:29:18Z")

</div>

Hi Uli  
Got it, thanks!

Br Sabu

---

<div class="post-metadata">

**Author:** ![Michael\_Class](https://forum.kurviger.com/user_avatar/forum.kurviger.com/michael_class/32/1042_2.png) [@Michael\_Class](https://forum.kurviger.com/u/Michael_Class)\
**Post date:** [June 15, 2020, 12:07pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/133 "2020-06-15T12:07:22Z")

</div>

> [@devemux86](#):
>
> Where was the last waypoint, on the stop?  
> Then you might not have actually passed it.
> 
> (anyway we just discuss possibilities, since it’s impossible to know what happened)

O.k. let’s become a bit more concrete: [https://kurv.gr/7Sk7U](https://kurv.gr/7Sk7U) was one of the routes.  
We did a Pause in Hellenthal. In the Village, I have left the route for about 500m (to find some coffee). Pressed “Pause” (while not being on the route any more). After “unpause” (and coffee and some other usage of the phone, sent some messages) ) I would have been routed again to the already passed Waypoint #6 (way behind). I have manually deleted it and everything got fine again.

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 16, 2020, 3:06pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/134 "2020-06-16T15:06:07Z")

</div>

[Kurviger 1.13.10 (Beta)](https://play.google.com/apps/testing/gr.talent.kurviger.pro) is on Google Play ([instructions](https://forum.kurviger.com/t/kurviger-beta-program/2176)):

**- [Map: add POI for parking in layers menu (Pro)](https://forum.kurviger.com/t/app-parkplatze-in-offlinekarten/3502)**

More points of interest in map layers menu for [parking areas](https://wiki.openstreetmap.org/wiki/Tag:amenity%3Dparking).

**- Various improvements**

Now you can start navigation “anywhere” also with “Strict navigation” option.  
After strict navigation starts, all expected strict navigation rules are applied.

---

<div class="post-metadata">

**Author:** ![Tom](https://forum.kurviger.com/user_avatar/forum.kurviger.com/tom/32/168_2.png) [@Tom](https://forum.kurviger.com/u/Tom)\
**Post date:** [June 19, 2020, 11:43am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/135 "2020-06-19T11:43:06Z")

</div>

> [@devemux86](#):
>
> navigation “anywhere” also with “Strict navigation” option.  
> After strict navigation starts, all expected strict navi

Tested with a little 50km shopping tour. Started somewhere outside of the route, was asked to drive to start or next waypoint… have used next waypoint, worked very well… have forced driving outside of the route where normally the next waypoint was skipped when using route option next waypoint… app perfectly guided back stolidly to the last unvisited waypoint of the strict navigation route unless manually skipping it, then guides to the next unvisited waypoint. What I have also recognized is that the app now earler and more intuitively calculates the alternative route as I had also asked for since a while. Till now perfect.

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 20, 2020, 11:28am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/136 "2020-06-20T11:28:34Z")

</div>

[Kurviger 1.13.11 (Beta)](https://play.google.com/apps/testing/gr.talent.kurviger.pro) is on Google Play ([instructions](https://forum.kurviger.com/t/kurviger-beta-program/2176)):

**- Various improvements**

In [waypoint types](https://forum.kurviger.com/t/app-waypoint-types/2821/108), etc.

---

<div class="post-metadata">

**Author:** ![rumbrummer](https://forum.kurviger.com/user_avatar/forum.kurviger.com/rumbrummer/32/113_2.png) [@rumbrummer](https://forum.kurviger.com/u/rumbrummer)\
**Post date:** [June 20, 2020, 8:46pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/137 "2020-06-20T20:46:17Z")

</div>

Hi,  
thanks for the update.  
Just a small remark to the waypoints menu: If I press the “Change Shaping / Via” icon without selecting a waypoint, all waypoints (besides start and destination) will be changed.  
It would be helpful, if the confirmation popup would give a hint for the direction, e.g. “Change all to ViaPoints” / “Change all to Shapingpoints”.  
Currently I get the same popup, please see screenshots below.  
It is not so important (low priority), but might bee a low hanging fruit.  
Question: What is the rule for the direction? Assumption: If all = Shaping → direction Via, otherwise direction Shaping. Right?  
Thanks and regards  
Markus

 ![Shap](https://forum.kurviger.com/uploads/default/original/2X/2/21a077780a952a762b716d3c14d7acbb1e14f7c8.jpeg)  
 ![Via](https://forum.kurviger.com/uploads/default/original/2X/a/ab47c23a4bd09d10d91368fe933ea0d47fb7c8c2.jpeg)

---

<div class="post-metadata">

**Author:** ![devemux86](https://forum.kurviger.com/user_avatar/forum.kurviger.com/devemux86/32/6239_2.png) [@devemux86](https://forum.kurviger.com/u/devemux86)\
**Post date:** [June 21, 2020, 7:26am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/138 "2020-06-21T07:26:35Z")

</div>

It’s a non destructive switch, must press OK in waypoints dialog to make it permanent.

It’s a switch to convert all waypoints to shaping points or via points.

---

<div class="post-metadata">

**Author:** ![rumbrummer](https://forum.kurviger.com/user_avatar/forum.kurviger.com/rumbrummer/32/113_2.png) [@rumbrummer](https://forum.kurviger.com/u/rumbrummer)\
**Post date:** [June 21, 2020, 8:08am UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/139 "2020-06-21T08:08:02Z")

</div>

Hi,

yes, I understood.

My proposal was just to give a hint for the direction (-\> Shaping or → Via ) in the alert box where the change hast to be confirmed.

I was trying to find out the rule for the direction - and I could not see the direction before pressing “OK”.

Regards

Markus

---

<div class="post-metadata">

**Author:** ![linux-user](https://forum.kurviger.com/user_avatar/forum.kurviger.com/linux-user/32/56_2.png) [@linux-user](https://forum.kurviger.com/u/linux-user)\
**Post date:** [June 21, 2020, 3:02pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/140 "2020-06-21T15:02:04Z")

</div>

> [@devemux86](#):
>
> It’s a non destructive switch, must press OK in waypoints dialog to make it permanent.

Indeed the functionality itself is fail safe. No need to change that.  
But the proposal from @rumbrummer would improve users perception.

The info box could look something like this:

> ### change
> 
> 19 waypoints into shaping points  
> \_\_\_\_\_\_\_\_\_\_\_\_\_CANCEL \_\_\_\_\_\_\_\_\_\_\_\_\_ OK

or vice versa

> ### change
> 
> 19 waypoints into via points  
> \_\_\_\_\_\_\_\_\_\_\_\_\_CANCEL \_\_\_\_\_\_\_\_\_\_\_\_\_ OK

---

<div class="post-metadata">

**Author:** ![Tom](https://forum.kurviger.com/user_avatar/forum.kurviger.com/tom/32/168_2.png) [@Tom](https://forum.kurviger.com/u/Tom)\
**Post date:** [June 22, 2020, 12:30pm UTC](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855/141 "2020-06-22T12:30:32Z")

</div>

Had again some app crashes in difficult situations  
my routing option is kurviger (online) and brouter (offline)  
The internet band width was low (edge)

 ![grafik](https://forum.kurviger.com/uploads/default/original/2X/4/4a0526d14840e38b8f749005cf6a1f79a2056a7d.png)

The app crashed several times and I have send a feedback from the device. Do you get this automatically or where is it sent?

 ![grafik](https://forum.kurviger.com/uploads/default/original/2X/d/ddb19465fe5b6e7fbf2396d327dfefecf0754900.jpeg)

My impression is that the app doesn’t switch to brouter calculation even if it takes much too long to calculate a valid result, then finally the app quits in a calculation subroutine.

would it be a solution to force offline calculation when an online calculation cannot be finished in a certain time (15 seconds or so) even if there is internet connection on the device? Or is it possible to read the actual internet band width on the device and switch based on a low bandwidth? Don’t know how a smooth solution would be, but I guess all is better than a crash.

When internet is available with enough band width all is working fine.

[Previous page](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855.md?page=6)

[Next page](https://forum.kurviger.com/t/kurviger-1-13-16-beta/2855.md?page=8)
