Kommend von Nordwesten verläuft die Straße weiter in Richtung L745 nach Süden. Um auf der B246 zu bleiben, muss man aktiv links abbiegen. Allerdings erkennt Kurviger das nicht als Abzweig und zeigt “Geradeaus” an. Hätte ich nicht auf die Karte geschaut, wäre ich vermutlich der L745 gefolgt, da keine Ansage kam.
Vielen Dank für den Hinweis. Diese Kreuzung ist wirklich fies.
Hier der Link zu Mapillary, da kann man die Abbiegung gut sehen. Aus Datensicht hätte ich gesagt, dass Kurviger hier richtig reagiert. Habe so eine Situation noch nie gesehen. Aus Datensicht hätte ich erwartet, dass der Bundesstraße als Vorfahrtsstraße gefolgt wird.
Hab mir die Mapillary Bilder genau angeschaut. Es scheint so, dass auf OSM die Straßennamen direkt an der Kreuzung gefehlt haben. Ich habe diese gerade eingetragen. Das sollte Kurviger in dieser Situation helfen die richtige Anweisung zu berechnen.
Die Daten sollten in spätestens 2 Wochen in Kurviger drin sein. Falls du danach mal wieder an der Stelle vorbeikommst und weiterhin keine Ansage kommt, dann bitte nochmal melden und dann sollten wir uns das nochmal genau anschauen, kann aber nichts versprechen, das ist wirklich tricky.
Ich hab das hier gerade wiedergefunden und mal den Link zur Route im OP geklickt. Die Abbiegehinweise enthalten immer noch keinen Hinweis darauf, dass man da abbiegen soll.
Das scheint ähnlich zu dem anderen Problem unter Abbiegende Hauptstraße, fehlende Ansage für geradeaus zu sein. Der Router sagt einfach nichts, wenn die Straße annähernd geradeaus geht. Egal, ob anderer Name, andere Priorität, etc.
Das ist so nicht richtig, wenn du z.B.rechts rum fährst, dann gibt es eine Abbiegeanweisung. Vermutlich tendiert Kurviger hier immer noch dazu, dass es sich hier um eine abbiegende Vorfahrtsstraße handelt.
Ich quote mal deine Aussage aus dem anderen Thread:
Hier der gleich Fall, nur das Kurviger diesesmal die Stelle als abbiegende Vorfahrtstraße erkennt und deshalb keine Abbiegeanweisung generiert. Du siehst, das ist leider nicht immer so einfach nur mit Kartenmaterial
Das ist vielleicht ein ganz kleines bisschen Off-Topic, aber: ich finde Kurviger sollte Ansagen für abknickende Vorfahrtsstraßen machen. Erstens ist das deutlicher und beugt Verwirrung vor, zweitens machen das andere Services wie Google Maps auch und drittens blinken ohnehin viel zu wenig Leute korrekt und brauchen mal einen Hinweis
Die Logik ist intern anders . Man kann also nicht nur für abknickende Vorfahrtsstraßen Ansagen generieren. Man könnte Allgemein mehr Ansagen generieren, das wird aus meiner Sicht dann aber auch schnell nervig. Also ich fahre ja echt viel mit Kurviger und es passiert mir wirklich nur sehr selten, dass eine Anweisung fehlt oder falsch ist.
Finde ich auch. Zumal manchmal schon die Anweisung kommt, “geradeaus” zu fahren. Dafür fehlen manchmal Abbiegeansagen. Deswegen fahre ich immer mit Blick aufs Display und ohne Ton. Auch im Auto. Obwohl ich dann natürlich auch schon mal eine Abbiegung verpasse
Und ich hab das Handy in der wasserdichten Jackentasche und fahre rein nach Gehör. Da wären mir mehr Hinweise wirklich lieb. Könnte man ja evtl. umschaltbar machen.
(Im Auto benutze ich Google Maps im “Nur wichtige Meldungen”-Modus, so dass der ruhig ist, und fahre dann rein nach Kartendarstellung.)
Here is the exact same behavior where the turn instruction is missing.
Stuff like this happens more often in Kurviger when the road “turns” at the intersection. Somehow Kurviger evaluates this as if you don’t need to turn there?
Why do the other routers manage to get this right? Why is Kurviger so “stingy” with turn instructions?
The funny thing is that even when you go straight at the same intersection, no turn instruction comes up. I thought it only didn’t show up when going straight and that Ruppertshüttener Straße would be announced as “left”, but no…
Something like this often happens with Kurviger at roads with right-of-way that turn, for example.
It’s even worse when this happens at highway interchanges.
And I thought this was a general OSM data problem. But as I wrote above, all routers on osm.org get it right.
It would be great if the Kurviger team could take a look at this issue.
I tested a little bit. Interesting enough to split this in a separate thread?
It seems that there is no turn instruction, when you follow a way with same name or reference. When the name changes, there is a turn instruction.
Example above - Lohr am Rhein: Same name of road.
Example above - Kloppenheim - Obarken.
The crossing seems to me weird - when you are driving B3 and turn left, the way/crossing is named “B3” as well. To my opinion it should not, but the point is, that the name does not change. So you drive a main road B3 over crossing B3 onto B3, all ways orange, while other crossing segmemts have different type/colour. You get instructions, when just leave the B3 and drive straight onto Bahnhofstr.!
You can try the behaviour with any splitted road, at least 5 tries worked this way.
Here in Karlsruhe: I would expect a hint to keep right, but as the name does not change, it means " Stay on this road".
My interpretation .. Yes, some more hints could be helpful at some points. But is it perhaps the strategy to avoid just too many and annoying turn instructions?
What, if I drive in my little town and I would always get an instruction, just because the road turns by 90° left or right? No idea, what the other routers do in this situation.
Just checked, thought this question must have been asked years ago.
It’s really awful when that happens on the highway. Because then you have to drive several kilometers until you can get back on track.
It doesn’t happen often, but there are highway interchanges where you have to take an exit just to stay on the same highway. Kurviger doesn’t say anything at such interchanges.
And such cases seem to be increasing. So at junctions and highway interchanges.
However, since other routers handle this fine, it’s not due to OSM data, but rather how Kurviger evaluates that data.
Maybe Kurviger should tweak the instructions a bit.
Also for motorways, the fix is the exit; even though it remains the same motorway, it’s simple—you turn the “exit” into a motorway-link.
Then Kurviger announces it correctly. But the “solution” is a workaround that has to be applied individually, and not a real fix. This needs to be implemented on Kurviger’s end,
and you can’t use that for normal intersections.
Back in the day, TomTom used to announce that you should turn right or left on every single curve on winding mountain roads if there was a small side street or forest path branching off at the curve. They fixed that eventually. So it doesn’t seem like an easy issue.
Hello @Toffel,
I recently ran into a similar quirk in CZ, which leads to one of those truly rare „wrong turns“ with an otherwise excellent navigation system:
The off-topic turn divergences have crept into this thread.
I find this quite interesting from the old thread..
I try to look at the screen as little as possible, ideally relying only on audio. That doesn’t work because I’d get lost due to missing instructions. Most of the time it’s fine, but I don’t fully trust it. I always thought that’s just how it is. With this info, a slider would be a highlight. „Muted - few for map-gazers - many for listeners“.